The ENCORE ENH924-CX 24-Port Fast Ethernet Switch is a powerful, high-performance Fast Ethernet switch, with
all 24 ports capable of 10 or 100Mbps auto-negotiation operation (NWay), which means the switch could automatically
negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro segmenting large
networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia
and imaging applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to
100Mbps network with no pain. Compared to the shared 10Mbps or 100Mbps networks, the switch delivers a dedicated
10/100Mbps connection to every attached client with no bandwidth congestion issue. This switch also supports auto
MDI / MDI-X function. Each port could be used to connect to another switch or hub with no crossover RJ-45 cable.
Store-and-forward switching mode promises the low latency plus eliminates all the network errors, including runt and CRC
error packets. To work under full-duplex mode, transmission and reception of the frames can occur simultaneously without
causing collisions as well as double the network bandwidth.
The switch is plug-n-play without any software to configure and also fully compliant with allkinds of network protocols. Moreover,
the rich diagnostic LEDs on the front-panel can provide the operating status of individual port and whole system.
Feature
- Complies with 10BASE-T specifications of the IEEE802.3 standard
- Complies with 100BASE-TX specifications of the IEEE802.3u standard
- Supports NWAY protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection
- 24 RJ-45 Ethernet ports for 100Base-TX and 10Base-T connectivity
- All Ports are Auto MDI/MDI-X auto crossover
- Supports full and half duplex operation on all ports
- Wire-speed packet filtering and forwarding rate
- Store-and-forward architecture filters fragment & CRC error packets
- Supports 8K MAC address entries in whole system
- 2M bits buffer memory
- Supports extensive LED indicators for network diagnostics
- Low power consumption (Realtek's Green Ethernet supported: link-down power saving and link-on dynamic cable length detection for power saving; EEE's Low Power Idle Mode supported.)
- External power adapter
- Compact size design
Specification
Standard: IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x full duplex operation and flow control
Interface: 24 10/100Mbps RJ-45 Fast Ethernet ports
Uplink: Auto MDI/MDI-X (Auto crossover)
Network Speed: 10/100Mbps & Full/Half duplex mode auto detection
MAC Address Table:8K MAC address entries
Memory:2M bits
Power Supply: External power adapter, DC 12V (100-240V/ 50-60Hz)
EMI: CE and FCC class A
Package Content
1x 24-Port Fast Ethernet Switch
1x power adapter
1x User's manual
1x Rack-mount brackets and screws (optional)