PRODUCTS

Wire

8-port 10/100 Fast Ethernet Switch

ENH-908-NWY

SPECIFICATION
Overview

The ENCORE ENH908-NWY 8-Port 10/100 Fast Ethernet Switch is a powerful, high-performance Fast Ethernet switch,
with all 8 ports capable of 10 or 100Mbps auto-negotiation operation (NWay), which means the switch could automatically
negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large
networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and
imaging applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps
networks with no pain. Compared to the shared 10Mbps or 100Mbps networks, the switch delivers a dedicated 10/100Mbps
connection to every attached client with no bandwidth congestion issue.

Store-and-forward switching mode promises the low latency plus eliminates all the network errors, including runt and CRC
error packets. To work under full-duplex mode, transmission and reception of the frames can occur simultaneously without
causing collisions as well as double the network bandwidth.

The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols.
Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of individual port and whole system.


Feature
  • Provide 8 10/100Mbps Fast Ethernet ports
  • Allow each port to run at its optimal speed while reducing network congestion
  • Feature plug-n-play operation that doesn’t require any software configuration
  • Provide front-panel diagnostic LEDs to monitor the operating status of the ports and the whole system
  • Provide compliance to many networking protocols
  • Allow micro-segmenting large networks into smaller networks for improved performance
  • Compact size design
  • Low power consumption (Realtek’s Green Ethernet supported: link-down power saving and link-on dynamic                                                                                       cable length detection for power saving; EEE’s Low Power Idle Mode supported.)
​Specification
 
Standard:
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x full duplex operation and flow control
Interface:
8 10/100Mbps RJ-45 NWay switching ports
Cable Connections:
RJ-45 (10BASE-T): Category 3,4,5 UTP/STP
RJ-45 (100BASE-TX): Category 5 or above UTP/STP
Network Data Rate:
Auto-negotiation (10Mbps, 100Mbps)
Transmission Mode:
Auto-negotiation (Full-duplex, Half-duplex)
LED indications:
System: Power, Port: Link/Activity
Buffer Memory:
96K bytes
MAC Address Table:
1K MAC address entries
Filtering/Forwarding Rate:
10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps
Operating Temperature:
00°C ~ 40°C(32°F ~ 104°F)
Operating Humidity:
10% ~ 90% RH, non-condensing
Storage Temperature:
-20°C ~ 70°C (-4°F ~ 158°F)
Storage Humidity:
5% ~ 90% RH, non-condensing
Power Supply:
External power adapter, DC 5V/0.5A
Emission:
CE and FCC class B
Package Contents:
One 8-Port Fast Ethernet Switch
One power adapter
User's Manual